The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56 mm. Offered in a variety of ring sizes, the 2" cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
Recon - M is the mid-height mount that we offer, the centerline height with 30mm rings is 1.64" and 1.7" with 34mm rings.
Recon - H is designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the tallest mount that we offer.
FEATURES
The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages:
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
34mm Scope Diameter
1.5" Inch Height
2" Cantilever Offset
This Mount comes with the Tactical levers.
MATERIALS & CONSTRUCTION
The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Precision machined from 6061 T6 Aluminum.
Hard coat anodized for a lifetime of performance.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock Lever system.
Made with pride in the U.S.A.
MPN: AD-RECON-34-TAC
UPC: 818503014147
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56 mm. Offered in a variety of ring sizes, the 2" cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
Recon - M is the mid-height mount that we offer, the centerline height with 30mm rings is 1.64" and 1.7" with 34mm rings.
Recon - H is designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the tallest mount that we offer.
FEATURES
The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages:
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30mm Scope Diameter
1.93" Inch Height
2" Cantilever Offset
MATERIALS & CONSTRUCTION
The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Precision machined from 6061 T6 Aluminum.
Hard coat anodized for a lifetime of performance.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock Lever system.
Made with pride in the U.S.A.
MPN: AD-RECON-H-30-STD
UPC: 818503010927
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56 mm. Offered in a variety of ring sizes, the 2" cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
Recon - M is the mid-height mount that we offer, the centerline height with 30mm rings is 1.64" and 1.7" with 34mm rings.
Recon - H is designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the tallest mount that we offer.
FEATURES
The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages:
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30mm Scope Diameter
1.7" Inch Height
2" Cantilever Offset
MATERIALS & CONSTRUCTION
The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Precision machined from 6061 T6 Aluminum.
Hard coat anodized for a lifetime of performance.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock Lever system.
Made with pride in the U.S.A.
MPN: AD-RECON-M-30-STD
UPC: 810008512784
The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56 mm. Offered in a variety of ring sizes, the 2" cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
Recon - M is the mid-height mount that we offer, the centerline height with 30mm rings is 1.64" and 1.7" with 34mm rings.
Recon - H is designed to be used in conjunction with a Laser Sighting System to bring the Objective Housing high enough to clear the laser, or for shooters requiring a higher cheek weld for heads up shooting. This is the tallest mount that we offer.
FEATURES
The AD-RECON mount features the Patented QD Auto Lock™ Lever system which has the following advantages:
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
34mm Scope Diameter
1.7" Inch Height
2" Cantilever Offset
MATERIALS & CONSTRUCTION
The AD-RECON mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Precision machined from 6061 T6 Aluminum.
Hard coat anodized for a lifetime of performance.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock Lever system.
Made with pride in the U.S.A.
MPN: AD-RECON-M-34-STD
UPC: 818503017919
Similar to the AD-RECON-S, the AD-RECON-SL mount is made for putting high power glass onto a bolt action rifle, M1A, M-14 or 10/22's. This mount is best suited for Bolt Action Rifles that feature an optics rail only above the action and does not have a handguard that extends over the barrel. This is the lowest mount that we offer. The AD-RECON-SL is a straight up scope mount with no eye relief built in. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock(tm) Lever system to accommodate both in spec and out of spec rail systems. Available in standard or Tac QD levers and either no built-in MOA or 20MOA built-in.
NOTE: Due to the low position of the rings, this mount will not be compatible with rifle scopes that have an objective lens greater than 56mm.
This mount is best suited for Bolt Action Rifles that feature an optics rail only above the action and does not have a handguard that extends over the barrel.
FEATURES
The AD-RECON-SL mount features the Patented QD Auto Lock(tm) Lever system which has the following advantages:
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
MATERIALS & CONSTRUCTION
The AD-RECON-SL mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Precision machined from 6061 T6 Aluminum.
Hard coat anodized for a lifetime of performance.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock Lever system.
Made with pride in the U.S.A.
MPN: AD-RECON-SL-34-STD
UPC: 818503011085
The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit that offers low, co-witness and lower 1⁄3 co-witness optic height. This mount will fit the RMR, SRO and similar red dots that share the same mounting footprint. Offered in both standard or TAC lever, it is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The Low version of this mount is available with the lever on the Left Side (LH) of the mount or the Right Side (RH) of the mount.
This mount will also fit Trijicon SRO
FEATURES
The AD-RMR-LW QD mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30% lighter than our standard RMR Mount.
Includes 6-32x1/2" FHCS mounting screws.
MATERIALS & CONSTRUCTION
Precision machined from 6061 T6 Aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Features the Patented QD Auto Lock™ Lever system which is fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Made with pride in the U.S.A.
MPN: AD-RMR-LW-H-STD
UPC: 810104931427
The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit that offers low, co-witness and lower 1⁄3 co-witness optic height. This mount will fit the RMR, SRO and similar red dots that share the same mounting footprint. Offered in both standard or TAC lever, it is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The Low version of this mount is available with the lever on the Left Side (LH) of the mount or the Right Side (RH) of the mount.
FEATURES
The AD-RMR-LW QD mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30% lighter than our standard RMR Mount.
Includes 6-32x1/2" FHCS mounting screws.
MATERIALS & CONSTRUCTION
Precision machined from 6061 T6 Aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Features the Patented QD Auto Lock™ Lever system which is fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Made with pride in the U.S.A.
MPN: AD-RMR-LW-NV-STD
UPC: 810104931434
The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit that offers low, co-witness and lower 1⁄3 co-witness optic height. This mount will fit the RMR, SRO and similar red dots that share the same mounting footprint. Offered in both standard or TAC lever, it is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The Low version of this mount is available with the lever on the Left Side (LH) of the mount or the Right Side (RH) of the mount.
This mount will also fit Trijicon SRO
FEATURES
The AD-RMR-LW QD mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30% lighter than our standard RMR Mount.
Includes 6-32x1/2" FHCS mounting screws.
MATERIALS & CONSTRUCTION
Precision machined from 6061 T6 Aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Features the Patented QD Auto Lock™ Lever system which is fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Made with pride in the U.S.A.
MPN: AD-RMR-LW-10-STD
UPC: 810008517475
The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit that offers low, co-witness and lower 1⁄3 co-witness optic height. This mount will fit the RMR, SRO and similar red dots that share the same mounting footprint. Offered in both standard or TAC lever, it is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The Low version of this mount is available with the lever on the Left Side (LH) of the mount or the Right Side (RH) of the mount.
This mount will also fit Trijicon SRO
FEATURES
The AD-RMR-LW QD mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30% lighter than our standard RMR Mount.
Includes 6-32x1/2" FHCS mounting screws.
MATERIALS & CONSTRUCTION
Precision machined from 6061 T6 Aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Features the Patented QD Auto Lock™ Lever system which is fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Made with pride in the U.S.A.
MPN: AD-RMR-LW-L-STD
UPC: 810008517956
The AD-RMR-LW QD mount was developed for the Trijicon RMR for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-RMR-LW QD mount is a one piece unit that offers low, co-witness and lower 1⁄3 co-witness optic height. This mount will fit the RMR, SRO and similar red dots that share the same mounting footprint. Offered in both standard or TAC lever, it is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.
The Low version of this mount is available with the lever on the Left Side (LH) of the mount or the Right Side (RH) of the mount.
This mount will also fit Trijicon SRO
FEATURES
The AD-RMR-LW QD mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
30% lighter than our standard RMR Mount.
Includes 6-32x1/2" FHCS mounting screws.
MATERIALS & CONSTRUCTION
Precision machined from 6061 T6 Aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Features the Patented QD Auto Lock™ Lever system which is fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Made with pride in the U.S.A.
MPN: AD-RMR-LW-L-RH-STD
UPC: 810008518939
The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. Available in absolute co-witness, lower 1/3 co-witness and High (1.93") heights in Black and Flat Dark Earth finishes. This mount is designed to fit the T1/T2, H1/H2 red dots as well as the Crossfire and Romeo 5 red dots. It will also fit similar red dots that share the same Micro footprint. The mount is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize and features the Patented QD Auto Lock(tm) Lever system to accommodate both in spec and out of spec rail systems.
FEATURES
The AD-T1 lightweight mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
MATERIALS & CONSTRUCTION
The AD-T1 lightweight mount is precision CNC machined from a block of 6061 T6 aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock™ Lever system.
Made with pride in the U.S.A.
MPN: AD-T1-LW-11-STD
UPC: 810008519097
The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. Available in absolute co-witness, lower 1/3 co-witness and High (1.93") heights in Black and Flat Dark Earth finishes. This mount is designed to fit the T1/T2, H1/H2 red dots as well as the Crossfire and Romeo 5 red dots. It will also fit similar red dots that share the same Micro footprint. The mount is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize and features the Patented QD Auto Lock(tm) Lever system to accommodate both in spec and out of spec rail systems.
FEATURES
The AD-T1 lightweight mount features the Patented QD Auto Lock™ Lever system.
Does not require proprietary tools for adjustment.
Can be adjusted with your finger or a flat blade screwdriver.
Lever can be configured to lock to the front or the rear.
Superior clamping surface to insure maximum rail engagement.
MATERIALS & CONSTRUCTION
The AD-T1 lightweight mount is precision CNC machined from a block of 6061 T6 aluminum.
Finished in hard coat type 3 Mil-Spec anodize for a rock hard lasting finish.
Fully adjustable to fit both in spec and out of spec rail systems.
American Defense MFG, LLC. products feature a lifetime warranty.
Features the Patented QD Auto Lock™ Lever system.
Made with pride in the U.S.A.
MPN: AD-T1-LW-10-STD
UPC: 810008519066
